Thermodul Installation Variations

Dual Mode Option

The dual-mode Thermodul is obtained by inserting the resistor directly into the hole located in the heating core (art. ka) between the copper pipes. The operation of the water system excludes the electrical one and vice-versa.

Dual Mode Thermodul

Double Strip Option

This solution is ideal for environments with large dimensions (e.g. gymnasiums, schools, restaurants, churches, etc.) and can also be installed at different heights. Two separate supply points per strip can be provided if the route is short; one supply point can also be provided.

Vertical Double Strip Option

This solution is adapted to incorporate the skirting board distributed around the perimeter with the addition of two double vertical strips which can also be placed at the sides. At the top of the heating body it is appropriate to install the 180° bend with venting valve.

Two Faring Option

This solution is used cases where it is not possible to fix the system directly to the wall (e.g. large windows
and other similar situations). Instead it is fixed to the floor, and gives double the heat output per metre.

Two Faring Option

Terms & Conditions | Links | Affiliates